Products
Technical
QZ-DXZ43 Series Cast Iron, Carbon Steel, Stainless Steel Pneumatic Rising Stem Type Knife Gate Valve〈Open/Closed or Regulating Type〉
Product documents:
-
File size: 3.0MB
-
File size: 649.1KB
Foreign Trade E-mails:
sale01@bestautovalve.com
sale02@bestautovalve.com
sale03@bestautovalve.com
sale06@bestautovalve.com
① EARNEST RIGOROUS DEDICATED PROFESSIONAL
② Source Goods, Powerful Factories, More Cost-effective
③ Ten Production Capacity in China, Stable Quality
Product Details
Features
01. Diameter range: DN50~1000
02. Nominal pressure: Normal PN10bar, special PN6, 16bar, air source pressure: 3~8bar
03. Valve body material: Gray Cast Iron (code: C), Cast Steel WCB (code: C), SS304 (code: B), SS316 (code: R)
04. Control mode: QZ11---single acting NC QZ12---single acting NO QZ2---double acting control
QZ114X---single acting NC regulating type QZ124X---single acting NO regulating type
QZ24X---double acting regulating type
Note: X=1 refers to the regulating type 4~20mA. DC input and no signal output (normal)
X=2 refers to the regulating type 4~20mA. DC input and output (special)
05. Special configuration: QZ-Ds---with top mounted handwheel
QZ-◆---with position limit switch (valve position signal output)
06. The flow direction of medium should be consistent with the arrow direction on the valve body
07. Mounted at any angle, keep cylinder vertically upward&installed horizontally which may extend life span
Component and Material Table

Note: □---nominal diameter.
Structure Diagram

Table of Applicable Medium Temp. Range for Common Valve Body Materials and Seals

Note: *represents the temperature of conventional applicable medium.
Dimension (Pn10bar)

Note: The flange is manufactured according to JB/T79-1994 standard by default, and can also be manufactured according to the standards specified by users,
such as GB/T9124, HG/T20592, ANSI, JIS, DIN and other standards.
QZ-DXZ43 Series Pneumatic Rising Stem Knife Gate Valve
Cast Iron, Carbon Steel & Stainless Steel | On/Off or Modulating Control
The BEST AUTOVALVE QZ-DXZ43 Series Pneumatic Rising Stem Knife Gate Valve is designed for pipeline applications requiring pneumatic on/off or modulating control. Available in cast iron, carbon steel and stainless steel configurations, the valve features a rising stem structure and pneumatic cylinder actuator.
With nominal sizes from DN50 to DN1000, the QZ-DXZ43 Series is suitable for a range of industrial pipeline requirements. Different sealing materials and control configurations are available to accommodate specified operating conditions.
Key Features
-
Size Range: DN50–DN1000
-
Nominal Pressure: PN10 as standard; PN6 and PN16 available as special options
-
Air Supply Pressure: 3–8 bar
-
Valve Body Materials: Grey cast iron, cast steel WCB, SS304 and SS316
-
Control Options: Pneumatic on/off control or modulating control
-
Sealing Options: Normal hard seal; PTFE sealing available as a special option
-
Installation: Can be installed at different angles
-
Stem Design: Rising stem structure
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Series | QZ-DXZ43 |
| Valve Type | Pneumatic Rising Stem Knife Gate Valve |
| Nominal Size | DN50–DN1000 |
| Standard Nominal Pressure | PN10 |
| Special Pressure Options | PN6, PN16 |
| Air Supply Pressure | 3–8 bar |
| Body Materials | Grey Cast Iron, WCB, SS304, SS316 |
| Sealing | Normal Hard Seal / Special PTFE |
| Actuator | Pneumatic Cylinder |
| Control Type | On/Off or Modulating |
| Flange Standard | JB/T79-1994 by default |
| Custom Flange Standards | GB/T9124, HG/T20592, ANSI, JIS, DIN |
Pneumatic Control Modes
The QZ-DXZ43 Series offers several pneumatic control configurations:
| Model | Control Configuration |
|---|---|
| QZ11 | Single-acting, normally closed (NC) |
| QZ12 | Single-acting, normally open (NO) |
| QZ2 | Double-acting |
| QZ114X | Single-acting, normally closed, modulating type |
| QZ124X | Single-acting, normally open, modulating type |
| QZ24X | Double-acting, modulating type |
For modulating configurations:
-
X1: 4–20 mA DC input, without signal output (standard configuration).
-
X2: 4–20 mA DC input and signal output (special configuration).
Special configurations include a top-mounted handwheel (QZ-Ds) and an echo transmitter for valve position signal output.
Main Components and Materials
The standard material configurations listed in the manual are:
| Component | Grey Cast Iron Version | Carbon Steel Version | SS304 Version | SS316 Version |
|---|---|---|---|---|
| Valve Body | HT200 | WCB | CF8 | CF8M |
| Sealing Ring | Normal hard seal; special PTFE | Normal hard seal; special PTFE | Normal hard seal; special PTFE | Normal hard seal; special PTFE |
| Valve Plate | SS304 | SS304 | SS304 | SS316 |
| Packing | Flexible graphite | Flexible graphite | Flexible graphite | Flexible graphite |
| Stud Bolts | 35# | 35# | SS304 | SS304 |
| Hexagon Nuts | 25# | 25# | SS304 | SS304 |
| Packing Gland | WCB | WCB | CF8 | CF8M |
| Bracket | HT200 | WCB | CF8 | CF8M |
| Cylinder | Assembly | Assembly | Assembly | Assembly |
Applicable Temperature Range
The manual provides different temperature ranges according to valve body material, packing and seat sealing material.
| Body Material | Packing | Fluoroplastic Seal | Alloy Steel Seal | Body Material Seal | Hard Alloy Seal | Polyurethane Seal |
|---|---|---|---|---|---|---|
| Grey Cast Iron | Fluoroplastic | -15 to 150°C | -15 to 150°C | — | -15 to 150°C | -15 to 80°C |
| Grey Cast Iron | Flexible Graphite | -15 to 150°C | -15 to 200°C | — | -15 to 200°C | -15 to 80°C |
| Carbon Steel | Fluoroplastic | -29 to 150°C | -29 to 150°C | — | -29 to 150°C | -15 to 80°C |
| Carbon Steel | Flexible Graphite | -29 to 150°C | -29 to 350°C | — | -29 to 350°C | -15 to 80°C |
| Stainless Steel | Fluoroplastic | -40 to 150°C | — | -40 to 150°C | -40 to 150°C | -15 to 80°C |
| Stainless Steel | Flexible Graphite | -40 to 150°C | — | -40 to 450°C | -40 to 450°C | -15 to 80°C |
Note: The asterisk in the original manual indicates the temperature of the normally applicable medium. Actual suitability should be confirmed according to the selected materials and operating conditions.
Dimensions
PN10 External Dimensions (Unit: mm)
| Nominal Size | L | H |
|---|---|---|
| DN50 | 50 | 335 |
| DN65 | 50 | 363 |
| DN80 | 50 | 395 |
| DN100 | 50 | 465 |
| DN125 | 50 | 530 |
| DN150 | 60 | 630 |
| DN200 | 60 | 750 |
| DN250 | 70 | 900 |
| DN300 | 80 | 1120 |
| DN350 | 90 | 1260 |
| DN400 | 100 | 1450 |
| DN450 | 120 | 1600 |
| DN500 | 130 | 1800 |
| DN600 | 140 | 2300 |
| DN700 | 165 | 2500 |
| DN800 | 190 | 2800 |
| DN900 | 203 | 3100 |
| DN1000 | 216 | 3400 |
Dimensions are based on the PN10 table in the instruction manual. Please confirm the final dimensions for the selected valve size and configuration.
Installation Notes
-
The medium flow direction should follow the arrow marked on the valve body.
-
The valve can be installed at different angles.
-
For horizontal pipeline installation, keeping the pneumatic cylinder vertically upward may help extend the service life of the valve.
-
The flange is manufactured according to JB/T79-1994 by default. Other standards, including GB/T9124, HG/T20592, ANSI, JIS and DIN, can be specified by the user.
Quality Warranty
The instruction manual specifies a one-year warranty under the technical conditions stated in the manual, effective from the date of delivery.
Faults caused by improper use or installation by the user are excluded from the warranty. Assistance will be provided to help resolve such issues.
Request a Quote
Contact BEST AUTOVALVE for product selection, technical details and quotations for the QZ-DXZ43 Series Pneumatic Rising Stem Knife Gate Valve. Please provide the required nominal size, pressure rating, body material, sealing configuration and control mode when making an inquiry.
Keywords: QZ-DXZ43 Series Cast Iron, Carbon Steel, Stainless Steel Pneumatic Rising Stem Type Knife Gate Valve〈Open/Closed or Regulating Type〉
Online Message
Recommended Products
Welcome to BEST AUTOVALVE.
SHANGHAI BEST AUTOMATION TECHNOLOGY Co.,Ltd.
HQ Add: No.3131, Jinshajiang Road, Jiading District, Shanghai, China
Domestic Sales Center: 8th Floor, Oriental Auto Parts City 3rd New Office Building, No.35, Dingbian Road, Jiading District, Shanghai, China
Phone: 021-57654321, 52751111
Zip Code: 201824
Foreign Trade Dept.: Room 813, 8th Floor, Oriental Auto Parts City 3rd New Office Building, No.35, Dingbian Road, Jiading District, Shanghai, China
Foreign Trade Hotline: 0086-21-66123456, 0086-21-66554433
Foreign Trade QQ: 2184211527, 3688575471, 1038330264, 1825023587
WeChat: 0086-18801801398, 0086-18801801318
0086-18801801308, 0086-18817946985
WhatsApp: 0086-18801801398, 0086-18801801318, 0086-18801801308
EARNEST · RIGOROUS · DEDICATED · PROFESSIONAL
Ten Production Capacity in China, Stable Quality
Ten Honesty Enterprises judged by government of Shanghai in China
mail link ma2
Pollyannasale01@bestautovalve.com
Pollyannasale02@bestautovalve.com
Viviansale03@bestautovalve.com
Victorsale07@bestautovalve.com
Copyright© 2024 Shanghai Best Automation Technology Co., Ltd. All Rights Reserved Website:66123456.com | bestautovalve.com | SEO Business License





Pollyanna
Vivian
